Compulab Airtop3 brings performance to the edge

“Apparently, the appetite for performance at the IoT edge knows no boundaries” said Irad Stavi, Chief product officer at Compulab. “We are seeing remarkable performance gains in the latest generation of CPUs and GPUs, but with great power comes greater power consumption. However, our engineers were able to improve the thermal headroom of Airtop3’s Natural Airflow cooling by over 30% so there was no need to settle for low power chips. This makes Airtop3 a small-form-factor fanless IoT edge server with unprecedented performance.”

The maximum RAM capacity is 128 GB DDR4-2666. Standard storage is comprised of 6 devices – two NVMe SSDs – up to 2 TB each and four 2.5” SATA 3 HDD/SSD with RAID support. Standard networking includes two GbE ports and support for Wi-Fi 802.11ac and 4G modem.

The four displays of the graphics card can work in tandem with the integrated graphics for a total of seven 4K displays.

The standard two NVMe cards and four 2.5” SATA SSD/HDD support up to 20 GB with RST or software RAID and are passively cooled in a dedicated thermal zone.
Storage can be enhanced using Airtop3’s NVM3 card installed in the PEG slot. NVM3 supports additional three NVMe cards up to NF1 30110 form factor. NVM3 enables remarkable data rate of over 9500 MBps and increases max storage capacity to over 60 TB.

Dual Gbit Ethernet (Intel i210 + Intel i219) and optional WiFi 802.11ac + 4G/LTE modem are available as a standard. For higher bandwidth, dual 10 GbE card can be installed in the PEG slot.

Airtop3 cooling is based on Compulab’s Natural Airflow technology that stimulates airflow without moving parts – by the waste heat of the 3 major heat sources (CPU, GPU and storage devices) each having a dedicated thermal zone. As Airtop3 is fanless and therefore eliminates aging of the product, which allows an unconditional warranty for 5 years.

The 7.5 liter housing is all-aluminium made of die-cast and extruded parts with precision machining for seamless fit, shock and vibration resistance.
Airtop3 supports Compulab FACE Modules (Function And Connectivity Extension Modules) which enable various application specific networking and I/O capabilities.

A new FACE Module designed specifically for Airtop3 – FM-AT3 adds 2x USB 3.1 gen 2 (one USB type-C) + 1x USB 3.1 gen 1, front audio jacks, mini-PCIe socket with SIM card, micro-SD and diagnostics LEDs for troubleshooting RAM, BIOS and display issues.

Specifikationer

Model

Name Airtop 3

Processor

Type Intel Xeon E3 2288G

Intel Core i9-9900K
Compatible with 9th generation Xeon E and Core processors
Chipset Intel C246 Chipset

Memory

Supported Up to 128 GB DDR4 ECC | non-ECC

4x DIMM DDR4-2666 ECC | Non ECC(unbuffered)
Max size 64GB

Storage

2x NVMe | SATA M.2 M-key 2280 | 2260 | 2242 | 2230

PCIe x4
4x 2.5″ HDD / SSD 4x disks up to 9.5mm

2x 15mm disks
Optional NVM3 card with 3x NVMe 3x NVME M.2 M-key 2260 | 2280 | 22110

Graphics & display



Integrated Intel HD Graphics 630 2x DisplayPort 1.2 – 4K @ 60 Hz

HDMI 1.4 – 4K @ 24 Hz
Optional discrete graphicscard NVidia Quadro RTX 4000

Geforce GTX 1660 Ti

Optional graphics




NVIDIA GTX 1060 6 GB 3x DisplayPort 1.4 – 4K @ 120 Hz + HDMI 2.0b 4K @ 60 Hz
Quadro P4000 8 GB Q4x DisplayPort 1.4 – 5K @ 60 Hz | 4K @ 120 Hz Note: integrated graphics can work in conjunction with discrete graphics for a total of 7 simultaneous displays.

Network

LAN On-board: dual Gbit Ethernet (Intel I219 + Intel I210)

Optional FACE Module: 4x GbE | 4x GbE + PoE | 2x optical LAN | Ethernet bypass
Wireless LAN* 802.11ac dual antenna + BT 4.2 Add-on M.2 E-key 2230 + 2x RP-SMA antennas

User can install another Wireless LAN adapter

*Optional
Cellular communication* LTE/WCDMA/GSM/GNSS Add-on M.2 B-key 3042 + 2x RP-SMA antennas

On-board micro-SIM socket

*Optional

I/O

USB 6x USB 3.0 type-A on-board (back panel)

By default (with FM-AT3 FACE Module,in front panel)


1x usb 3.1 gen 2 type C
1x usb 3.1 gen 2 type a
1x usb 3.1 gen 1 type a
Audio On-board Realtek ALC1150 audio codec with line-out | mic | optical S/PDIF

By default (with FM-AT3 FACE Module,in front panel)

Extra RealtekALC1150 Audio codec with headphones-out

Audio over HDMI | DP
3x RS232 serial port 2x full-UART

Extra 6 serial ports available with optional FM-SER FACE Module

Extensions

FACE Modules (Function and Connectivity Extension Module):
FM-AT3 : Built-in-self-test | USB type C + 2x USB type A | audio | micro-SD | mini-PCIe
FM-POE : 4x Gbit Ethernet with PoE (PSE) | 2x USB 2.0
FM-LANE4U4: 4x Gbit Ethernet | 4x USB 2.0
FM-OPLN: 2x Optical Gbit Ethernet (SFP+) | 2x USB 2.0
FM-EBP : Gigabit Ethernet bypass
FM-SER : 6x RS232 / RS485
FM-XTDM2 : 2x mini-PCIe
PCIe x16 standard-height single-slot Used for discrete graphics card (GeForce or Quadro) / NVM3 card / 10 GbE card/ another full-height PCIe card
M.2 E-key Normally used for optional Wi-Fi and 4G cards
M.2 B-key + micro-SIM socket

Extra features

Natural airflow (NAF) cooling Fanless* natural convection cooling with no moving parts

CPU, graphics card and PSU are all passively cooled. No case-fan or any other active cooling is required
Redundant power 2x DC inputs with automatic failover
Trusted platform module 2.0 (TPM 2.0)
I3M (integrated interactive information monitor) An integrated OLED display with navigation keypad for displaying real time power consumption, temperatures and system information.
Digital power & reset management using FPGA Provides precise power-sequencing timing and system voltage monitoring
Clamshell opening | tool-free service Case opens by pressing the top-bar

RAM modules and HDD-cartridge require no tools for installation

Other devices may require a Phillips screwdriver
System diagnostics LEDs Discrete LED indicators of RAM detection, BIOS post HDMI and DisplayPort detection for quick field diagnostics in case of booting issues
Configurable auto-on System behaviour on power can be set to:

on (SO)
Off (S5)
Last state

BIOS & OS

Bios AMI Aptio V
Operating systems: Windows 10 Professional | Linux Mint Compatible with other Windows 10 variants

Compatible with other Linux variants

Compatible with other hypervisors and operating systems (e.g. ESXi, FreeBSD)

Power

Input voltage range 17V – 24V
Power consumption 8W – 300W Power consumption depends on

– CPU and graphics card

– System load

– Installed devices

– Connected peripherals

Temperature & humidity

Operating temperature range: Up to -40°C to 70°C
Relative humidity: 5% – 95% non-condensing

Mechanical specifications

Dimensions 10 cm (W) x 30 cm (H) x 25.5 cm (D)
Weight 6 Kg to 9 Kg*
Material All Aluminum housing
Natural airflow cooling (fanless)
Mounting Wall mounting bracket * sold separately

DIN-rail mounting bracket*

Airtop 3

Available on back-order

9.373,00 DKK 11.716,25 DKK