RUT955 is a highly reliable industrial LTE Cat 4 router that delivers high performance and GNSS location capabilities.

Ethernet, Digital, and Analogue I/O, RS232, RS485, GNSS (GPS), microSD, and USB interfaces allow for an incredible variety of industrial application scenarios.

It is equipped with connectivity redundancy via Dual SIM failover.

It comes with RutOS which is packed with advanced software features, like Modbus, SNMP, TR-069, NTRIP, MQTT, and multiple VPN services.

CONNECTIVITY
4G/LTE (Cat 4), 3G, 2G

DUAL SIM
For additional connection reliability

GNSS
Global Navigation Satellite System for location services and time synchronization

I/O
Multiple digital and analog inputs and outputs for equipment control and event notification

SERIAL PORTS
RS232/RS485 serial communication interfaces

RMS
Compatible with Teltonika Remote Management System

Weight 3,000 kg
Dimensions 0,00 × 0,00 × 0,00 mm
MOBILE Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP Black/White list: Operator black/white list Band management: Band lock, Used band status display APN: Auto APN Bridge: Direct connection (bridge) between mobile ISP and device on LAN Passthrough: Router assigns its mobile WAN IP address to another device on LAN Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services (not available in standard FW) WIRELESS Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA) WiFi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation SSID: SSID stealth mode and access control based on MAC address WiFi users: up to 100 simultaneous connections Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page ETHERNET WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX LAN: 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX NETWORK Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT, Wake On Lan (WOL) VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall: Port forward, traffic rules, custom rules DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e DDNS: Supported >25 service providers, others can be configured manually Network backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover Load balancing: Balance your internet traffic over multiple WAN connections SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)

Teltonika RUT955 Industrial LTE/4G Cat 4 Router

10 in stock

1.490,00 kr. 1.862,50 kr.