Tensor-I20A er en blæserløs, fuldt konfigurerbar industri PC, med uanede muligheder for konfigurationer.
Med mulighed for at konfigurere ned til den mindste detalje, vil der være større mulighed for at designe en PC til netop ens projekt og derved undgå unødig interface.

Vores Multi IoT konfiguration giver dig den ideelle PC til IoT Gateways og industrielle control stations, bare for at nævne nogle enkelte af mulighederne for denne PC.

Multi IoT er konfigureret med følgende:

  • Op til 64GB DDR4 RAM
  • 1x DisplayPort
  • 1x M.2 key-M til storage
  • 1x GbE LAN
  • 4x RS-232
  • 1x CANbus
  • 4x GPIO
  • 4x USB3.1
  • 1x M.2 key-E til WiFi / BT
  • 1x M.2 key-B til cellular modem
  • Power: 1x 12V med en 100-240V 60W PSU
  • Dimensioner: 200x250x35mm

Er du nysgerrig efter flere detaljer om Tensor-I20A? Læs mere her.

Compulab model

Specifikationer

Model

Name Tensor I20A
Part Number TENSORI20A
Block Diagram Tensor I20A Block Diagram
Current HW Revision N/A
Long Term Availability Yes - 15 years availability (specifications may be upgraded or changed)

Processor

Type Intel Xeon E-2276ML Intel Core i7-9850HL Intel Core i5-9300H Intel Core i3-9100HL Intel Celeron C4932E
Cores 6 cores, 12 threads, 12MB cache, ECC support 6 cores, 12 threads, 9MB cache 4 cores, 8 threads, 8MB cache 4 cores, 4 threads, 6MB cache, ECC support 2 cores, 2 threads, 2MB cache, ECC support
Clock speed 2.0GHz (boost up to 4.2GHz) 1.9GHz (boost up to 4.1GHz) 2.4GHz (boost up to 4.1GHz) 1.6GHz (boost up to 2.9GHz) 2.8GHz
TDP 25W 25W 35W 25W 51W
Chipset Intel CM246

Memory

Supported Up to 64 GB. 2x SO-DIMM 204-pin DDR4-2400 ECC | Non-ECC (unbuffered)
Installed Not installed

Storage features

Supported NVME M.2 2280 SATA M.2 mSATA SATA 2.5"
Type Up to 8 NVMe devices, PCIe3 x4 interface Up to 2 SATA devices (M.2 key-M 2280 | 2260 | 2242) Up to 2 mSATA devices Up to 2 2.5" SSD / HDD devices
Installed Not installed

Specific storage depends on selected TELs

Graphics

GPU Integrated Intel UHD Graphics P630 / 630 / 610
Display Interface Up to 3x DisplayPort 1.2 - 4K @ 60 Hz | HDMI 1.4 - 4K @ 30Hz
Specific types of ports depends on selected TELs.

I/O features

Display Up to 3x 4K displays
- DisplayPort 1.2 4096x2304 @ 60Hz
- HDMI 1.4 4096x2160 @ 30Hz
USB Up to 4x USB 3.1 gen 1
Over 40 ports of USB2 can be installed
USB power in S5 can be configured per port
Audio 3.5mm jacks
Headphones out + mic. in using TI PCM2912A Codec
Multiple audio ports can be installed.
Serial ports Using DB9 connector
Each port supports RS323 half/full duples and can be configured independently
Over 20 ports can be installed
CANbus Using DB9 connector
Supports CAN 2.0A Specifications and ISO 11898-2
Bit rate of up to 1Mbit/s
DIP switch for enabling/disabling on-bard 120 Ohm termination
Isolation per UL 1577, transient immunity: 30kV/uS, isolated DC 5V power
CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that ca be upgraded
Driverless operation in Windows
USB native device in Linux
Over 10 ports can be installed
GPIOs Unidirectional Ioslation block, isolation per UL 1577
GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
Each GPIO can be configured as input/output in software
Terminal block connector
3.3V / 5V level can be selected by a DIP switch
Over 100 GPIO ports can be installed

Networking features

Gbit Ethernet Using Intel i210, each port is on an independent PCIe port
Using RJ45 ports
20 ports can be installed
Gbit Ethernet with PoE source (PSE) POE+ 802.3at 30W per port
Using Intel i210, each port is on an independent PCIe port/br> Using RJ45 ports
12 ports can be installed
LTE Universal LTE cat 12 (SIMCOM SIM7912G-M2) by default.
Other M.2 key-B or mini-PCIe modems can be installed.
Each modem-TEL has a SIM card tray optionally accessible from the outside.
Number of antennas as required by modems can be installed. Antennas can be positioned anywhere on the computer's perimeter.
Up to 9 LTE modems can be installed.
WiFi Up to 9 WiFi adapters can be installed
Bluetooth Up to 9 adapters can be installed
Bluetooth is normally an added feature in WiFi adapter

Extension features

M.2 key E Up to 9 M.2 key-E devices can be installed.
M.2 key B Up to 9 M.2 key-B devices can be installbed.
Each has a SIM card tray optionally accessible from the outside.<\td>
M.2 key M M.2 key-M devices up to M.2 2280 devices, PCIe x4.
Each device has integrated cooling.
Up to 8 M.2 key-M devices can be installed.
Mini PCI Express Up to 9 mini PCI express devices can be installed.
Each has a SIM card tray optionally accessible from the outside.
PCI Express Currently under development

Security, reliability & manageability features

Optional trusted platform module 2.0 (TPM 2.0) Infineon SLM 9670AQ2.0
Features: TPM 2.0, RSA-2048, ECC-256, SHA-256, EAL4+
Auto-detection of connected TELs and auto re-configuration TELS are identified during power-up.
TRIP mode is adjusted to comply with specific TEL requirements (e.g. 4x PCIe x1 & 1x PCIe x4 / SATA / USB3).
If TEL is incompatible to TRIP capabilities, TEL is automatically disabled.
Configuration control and reporting In BIOS, TRIPs and connected TELs can be listed.
For each TEL, revision, serial number and specific information (e.g. MAC address) can be displayed.
TEL connected to each TRIP can be enabled on detection, disabled or unconditionally enabled.
Configurable CPU TDP Maximum power of the CPU can be adjusted in BIOS to match:
Environmental conditions.
Cooling capacity of the enclosure.
Target opreating temperature.
Optional out-of-band management Optional supervisor micro-controller featuring.
Safe remote-BIOS-update.
Powering up / powering down the system.
Advanced watchdog.
System recovery.
Auto-on On power resume, system powers on and boots.

BIOS & OS

BIOS AMI Aptio V.
Windows 10 Professional Compatible with other Windows 10 variants.
Linux Mint Compatible with other Linux variants.
Others Compatible with other hypervisors and operating systems (e.g. ESXi, FreeBSD.
Installed Nothing installed.

Operating Conditions

Input Voltage Up to DC 12V - 56V (depending on voltage range on the chosen power module).
Power Consumption 20W - 60W.
Power consumption depends on
- CPU type and TDP settings
- System load
- Installed devices
- Connected peripherals
Operating Temperature Commercial Temperature Range: 0°C to 70°C

Can be ordered with Extended or Industrial Temperature range:
Up to -20°C to 70°C (Extended TE)
Up to -40°C to 85°C (Industrial TI)
Relative Humidity 5% - 95% non-condensing

Enclosure

Material All aluminum housing
Cooling Fanless convection cooling through the housing
Dimensions From:
200 mm (W) X 200 mm (D) X 25 mm (H)
To:
300 mm (W) X 200 mm (D) X 69 mm (H)

Dimensions depend on enclosure variant.
Weight 1kg to 4kg.

Weight depends on enclosure variant and on configuration.
Mounting VESA / wall mounting bracket.
DIN-rail mounting bracket.
Both sold separately.

Tensor I20A Multi IoT

Fra: 7.275,18 DKK 9.093,98 DKK